Tech Gas Training

Core Commercial Gas Laundry

CCLNG1, Core Commercial Gas Laundry, is a pre-requisite to have before attaining the additional qualification, CLE1 – Installation of Commercial Gas Laundry Appliances. This is only available at our South Wales Centre.

Please contact for course dates and costs

Core Domestic Gas Safety

CCN1, Domestic Gas Safety, is the core qualification and is normally a pre-requisite to have before attaining other additional qualifications. There are some exceptions to this, but generally most candidates must complete CCN1, or already be in possession of this qualification before adding others. In broad terms CCN1 contains the following core modules.

Installation of Commercial, Direct Fired Appliances

CDGA1, installation of direct fired commercial appliances, covers what you'll need to know in order to safely install and commission these types of appliances. Broadly, the course covers the following knowledge areas.

Domestic Gas Fired Central Heating, Water & Heating Appliance

CENWAT1, Domestic Gas Fired central heating, water & heaters, covers what you’ll need to know in order to safely install, service and repair this particular category of appliances.

Core Emergency Service Provider - Natural Gas

CESP1, Emergency Service Provider - Natural Gas, is the core qualification for ESPs and is normally a pre-requisite to have before attaining any further ESP qualifications. There are some exceptions to this, but generally most candidates will be conversant with CCN1, or already be in possession of this qualification before adding others.

This course is available at our Cardiff Centre: GATC (Wales) Ltd, Pontypridd, CF37 5UA  Ring 01443 841720 to book or enquire  

Installation of Commercial, Indirect Fired Appliances

CIGA1, installation of indirect fired commercial appliances, covers what you'll need to know in order to safely install and commission these types of appliances.

Domestic Gas Cooking Appliances

CKR1, Domestic Gas Cooking Appliances, covers what you'll need to know in order to safely install, service and repair domestic gas cooking appliances.

Installation of Commercial Gas Laundry Appliances

CLE1, Installation of Commercial Gas Laundry Appliances, covers what you'll need to know in order to safely install & commission commercial gas laundry appliances. 

This course is only available at our Cardiff Centre: GATC (Wales) Ltd, Pontypridd, CF37 5UA : Ring 01443 841720 to book or enquire  

Specific Core for Meter Installers - Natural Gas

CMA1, Domestic Gas Meters, covers what you'll need to know in order to safely install, exchange, remove and commission gas meters.

This course is only available at our Cardiff Centre: GATC (Wales) Ltd, Pontypridd, CF37 5UA : Ring 01443 841720 to book or enquire  

Specific Limited Scope for Meter Installers - Natural Gas

CMA2LS, Domestic Gas Meters, covers what you'll need to know in order to safely install, remove and commission gas meters.

This course is only available at our Cardiff Centre: GATC (Wales) Ltd, Pontypridd, CF37 5UA  : Ring 01443 841720 to book or enquire  

Commercial Low Pressure Diaphragm & Rotary Meters

CMET1, Commercial Low Pressure Diaphragm & Rotary Displacement Meters, covers what you'll need to know in order to safely install, exchange, remove & commission the above gas meters.

This course is available at our Cardiff Centre: GATC (Wales) Ltd, Pontypridd, CF37 5UA : Ring 01443 841720 to book or enquire  

Commercial Diaphragm, Rotary & Turbine Meters

CMET2, Commercial Diaphragm, Rotary & Meters, covers what you'll need to know in order to safely install, exchange, remove & commission the above gas meters. 

This course is available at our Cardiff Centre: GATC (Wales) Ltd, Pontypridd, CF37 5UA  : Ring 01443 841720 to book or enquire  

Commercial Gas Meter Instrumentation, Limited Scope

CMIT1LS, Commercial Gas Meters Instrumentation - Limited Scope, covers what you'll need to know in order to gain an appreciation of the instrumentation associated with commercial gas meters.

This course is available at our Cardiff Centre: GATC (Wales) Ltd, Pontypridd, CF37 5UA  : Ring 01443 841720 to book or enquire  

Core Commercial Natural Gas

COCN1, Commercial Natural Gas, is the core qualification and is normally a pre-requisite to have before attaining other additional commercial qualifications. There are some exceptions to this, but generally most candidates must complete COCN1, or already be in possession of this qualification before adding commercial qualifications.

Core Commercial Natural Gas - Limited Scope

COCNP1LS, Commercial Natural Gas, is a core qualification for gas related works in commercial premises, however, is limited scope covering less than the full core qualification, COCN1. It is a pre-requisite to have before attaining other additional commercial qualifications. There are some exceptions to this, but generally most candidates must first complete CCN1.

This course is available at our Cardiff Centre: GATC (Wales) Ltd, Pontypridd, CF37 5UA:   Ring 01443 841720 to book or enquire  

Changeover Core Domestic to Core Commercial Gas Safety

CoDNCO1, Changeover core Domestic to core Commercial Gas Safety, covers what you'll need to know in order to understand the differences between Domestic and Commercial core gas safety, how this impacts upon testing and gas detection; also strength testing and purging the installation. The training also makes reference the key differences between considerations for commercial appliances as opposed to domestic appliances.

Change over -Domestic To Commercial Meters, E.S.P.

CoDNESP1, Changeover from Domestic to Commercial Gas Meters, covers what you'll need to know in order to safely install, exchange, remove & commission commercial gas meters.

This course is available at our Cardiff Centre: GATC (Wales) Ltd, Pontypridd, CF37 5UA :  Ring 01443 841720 to book or enquire  

Natural Gas to LPG Conversion for Permanent Dwellings, Residential Park Homes and Leisure Accommodation Vehicles

CoNGLP1, Natural Gas to LPG conversion, covers what you'll need to know in order to understand the differences between natural gas and LPG, how this impacts upon testing and gas detection; also installation, servicing and repair of relevant appliances.

Installation of Commercial Overhead Plaque & Tube Appliances

CORT1, installation of Commercial overhead plaque or tube appliances, covers what you'll need to know in order to safely install and commission these types of appliances.

Flue Gas Analysers

CPA1, Flue Gas Analysers, covers what you'll need to know in order to use a flue gas analyser in conjunction with installation work, servicing and repair of gas appliances.

Domestic Gas Ducted Air Heaters

DAH1, Domestic Gas Fired Ducted Air Heaters (Warm Air), covers what you'll need to know in order to safely install, service and repair domestic gas fired ducted air heaters.

Domestic Gas Fires & Wall Heaters

HTR1, Domestic Gas Fires & Wall Heaters, covers what you'll need to know in order to safely install, service and repair domestic gas fires & wall heaters.

Caravan Gas Fires

HTRLP2, Caravan Gas Fires, covers what you'll need to know in order to safely install, service and repair domestic gas fires within caravans.

First Fix Installation of Commercial Appliances - Limited Sc

ICAE1LS, First Fix Installation of Commercial Appliances, covers in limited scope what you'll need to know in order to safely install, service and repair commercial appliances.

This course is available at our Cardiff Centre: GATC (Wales) Ltd, Pontypridd, CF37 5UA :  Ring 01443 841720 to book or enquire 

First Fix for Commercial Pipework

ICPN1 is the core qualification for the installation of first fix pipework into commercial premises. It is assumed that candidates wishing to subsequently test and purge installed pipework would also hold the requisite qualifications to do this. Generally candidates will already have attained CCN1, COCNPI1LS or CCN1+ CoDNCO1, plus TPCP1 or TPCP1A. Strength Testing

First Fix for Commercial Pipework - Limited scope

ICPN1LS is a qualification that provides an understanding of first fix pipework installations into commercial premises. It is assumed that candidates wishing to subsequently test and purge installed pipework would either hold or subsequently attain the requisite qualifications to do this.

This course is available at our Cardiff Centre: GATC (Wales) Ltd, Pontypridd, CF37 5UA :  Ring 01443 841720 to book or enquire 

Domestic Gas Laundry Appliances

LAU1, Domestic Gas Laundry Appliances, covers what you'll need to know in order to safely install, service and repair domestic gas laundry appliances.

Domestic Gas Meters

MET2 (Formerly MET1), Domestic Gas Meters, covers what you'll need to know in order to safely install, exchange, remove & commission domestic gas meters.

Install Domestic Gas Meters, Limited Scope

MET3LS, Domestic Gas Meters & Limited Scope, covers what you'll need to know in order to safely install, remove & commission domestic gas meters.

Install Domestic Gas Meters

MET4, Install Domestic Gas Meters, covers what you'll need to know in order to safely install & commission domestic gas meters.

Domestic Medium Pressure Regulators & Controls

REGT1, Domestic Medium Pressure Meter Regulators & Controls, covers what you'll need to know in order to safely install, exchange, remove & commission domestic MP regulators & controls.

This course is available at our Cardiff Centre: GATC (Wales) Ltd, Pontypridd, CF37 5UA :  Ring 01443 841720 to book or enquire 

Strength Testing, Tightness Testing & Purging

TPCP1 is the core qualification for strength testing, Tightness testing and purging of industrial installations, not exceeding 16bar pressure. Generally candidates will already have attained CN1, COCNPI1LS or CCN1+ CoDNCO1 before training for and attaining TPCP1.

Strength Testing, Tightness Testing & Purging

TPCP1 and 1A is the core qualification for strength testing, Tightness testing and purging of low pressure installations. Generally candidates will already have attained CCN1, COCNPI1LS or CCN1+ CoDNCO1 before training for and attaining this qualification.

Core Commercial Catering Gas Safety

CCCN1, Core Commercial Gas Safety, is the core qualification and is normally a pre-requisite to have before attaining other additional commercial catering appliance qualifications. There are some exceptions to this, but generally most candidates must complete CCCN1, or already be in possession of this qualification before adding commercial catering.

Changeover, Domestic to Commercial Catering Appliances Gas Safety

COCATA1, Changeover Domestic to Commercial Appliances Gas safety, adds to CCN1 and provides for the core qualification that is an alternative pre-requisite to CODC1 before attaining other additional commercial catering appliance qualifications. There are some exceptions to this, but generally most candidates might complete COCATA1, to enhance their CCN1 qualification before adding commercial catering.

Changeover, Core Domestic to Commercial Catering Gas Safety

CODC1, Changeover Domestic to Commercial Gas safety, adds to CCN1 and provides for the core qualification that is normally a pre-requisite to have before attaining other additional commercial catering appliance qualifications. There are some exceptions to this, but generally most candidates must complete CODC1, to enhance their CCN1 qualification before adding commercial catering.

Commercial Catering Combo Pack (1 & 3)

COMCAT Groups 1&3 Catering Appliances, as the titles suggest provides for what you’ll need to know in order to safely install, service and repair commercial ranges, water boilers (pressure and expansion types) and deep fat & pressure fryers.

Commercial Catering Combo Pack Extra (1,2,3,5)

COMCAT Groups 1-3 + 5 Catering Appliances provides for what you’ll need to know in order to safely install, service and repair commercial ranges, water boilers (pressure and expansion types), deep fat & pressure fryers and forced draught burners. 

This course is available at our Cardiff Centre: GATC (Wales) Ltd, Pontypridd, CF37 5UA  : Ring 01443 841720 to book or enquire  

Commercial Catering Appliances, Group 4

COMCAT Groups 4 Catering Appliances, as the titles suggest provides for what you’ll need to know in order to safely install, service and repair Fish and Chip Ranges. 

This course is available at our Cardiff Centre: GATC (Wales) Ltd, Pontypridd, CF37 5UA : Ring 01443 841720 to book or enquire  

Commercial Catering Appliances, Group 5

COMCAT Group 5 Catering Appliances provides for what you’ll need to know in order to safely install, service and repair Forced Draught Burner friers.

LPG Conversion For Commercial Mobile Catering Vans

CoNGLP1-CMC covers what you’ll need to upgrade your existing CoNGLP1 qualification in order that you might install, service and repair LPG supplied commercial catering appliances, fitted in mobile catering vans. 

This course is available at our Cardiff Centre: GATC (Wales) Ltd, Pontypridd, CF37 5UA  : Ring 01443 841720 to book or enquire  

Electro Fusion Jointing, Low Pressure

EFJLP1 covers what you’ll need to know in order to safely joint PE pipework for low pressure installations. The installation can be for either natural gas, NG, or liquid petroleum gas, LPG.

1/2 Day for Training & Assessment

New Entrant Training Program - Domestic

This course, along with your portfolio of evidence, will prepare you to complete the Core domestic gas assessment and embark on further training to expand on this qualification. 

This course is now available at Tech Gas Training.

TPCP Training

TPCP training icovers everything you need to know for TPCP1 and TPCP1A assessments.

LPG Training Initial

LPG Training covers all you need to know for CONGLP1PD, RPH & LAV.

Limited Scope Pipework Training

Limited Scope Pipework core training covers everything you need to know for COCNP1LS and ICNP1LS.

This course is available at our Cardiff Centre: GATC (Wales) Ltd, Pontypridd, CF37 5UA  : Ring 01443 841720 to book or enquire  

Limited Scope Meters Training

Limited Scope Meters core training covers everything you need to know for CMA2LS and MET3LS. 

This course is available at our Cardiff Centre: GATC (Wales) Ltd, Pontypridd, CF37 5UA : Ring 01443 841720 to book or enquire  

Domestic Refresher Training

This course covers all that you will need to know for re-assessment of your domestic core gas safety qualification

Domestic Appliance Training

This training is for any domestic appliance assessments you wish to undertake and will be tailored around this.

Commercial Training

Commercial training covers all that you will need to know to complete the first part of the commercial core. It is followed by Commercial Heating or Catering Training day.

Commercial Heating Training

Commercial Heating Training leads on from Core Commercial Training and covers the latter part of this core as well as all you need to know for CORT1, CIGA1 and CDGA1.

Commercial Catering Training

Commercial Catering Training covers all you need to know and allows you to go on to complete COMCATS 1, 3 & 5 the duration is 1 day and youi need a valid core for it to sit on.

Conversion from Natural Gas to LPG for Boats

This covers what you’ll need to know in order to understand the differences between natural gas and LPG, how this impacts upon testing and gas detection; also installation, servicing and repair of relevant appliances on boats. You must have other LPG qualifications in order to bolt this on.

Changeover Core Domestic to Core Commercial Laundry Gas Safety

CoCCLNG1, Changeover Domestic to Core Commercial Laundry Gas Safety, adds to CCN1 and provides for the core qualification that is normally a pre-requisite to have before attaining ‘CLE1’ (Installation of Commercial Gas Laundry Appliances). 

This course is available at our Cardiff Centre: GATC (Wales) Ltd, Pontypridd, CF37 5UA  : Ring 01443 841720 to book or enquire  

Changeover Commercial Gas to Domestic Gas

This changeover will allow you to convert your commercial gas safety core to a domestic gas safety core

Unvented Hot Water

Unvented hot water training and certification is a requirement for any operative who wants to work on unvented hot water systems. Part G3 of the Building Regulations define unvented hot water systems as a “controlled service”.

Please contact us via telephone or email for our next available course dates.

Part L Energy Efficiency

Our Part L Energy Efficiency is a 1/2 day assessment only that will provide you with a full certificate to comply with Part L of the Building Regulations.

Water Regs

This course introduced you to the Water Regulations currently in place which allows you to appear on public lists of approved operatives and to work without need of external water inspectors.

Please contact us by telephone or email for our next available course date.

Cavity Wall

This Cavity Wall technician training helps to define the responsibility involved when installing cavity wall insulation with specific regard to appliances burning Gas, Oil or solid fuel.

Boiler Diagnostics

This training-only module provides you with all you need to know to correctly identify and rectify faults in modern condensing and combi boilers. This training builds upond knowledge gained during your CCN1 and CENWAT qualifications. This course runs out of our South Wales Centre in Treforest. Ring 01443 841720 to book or enquire

Carbon Monoxide/Dioxide in Domestic Atmospheres

This one-day course will bring your up to speed with British Standard 7967 to respond appropriately and safely to reports of suspected Carbon Monoxide in domestic environments.

This course is now available at Tech Gas Training.

Safe Isolation

Safe Isolation for people working with electricity who are not electricians by trade. Course includes single phase and 3 phase installations.

This course is available at our Cardiff Centre: GATC (Wales) Ltd, Pontypridd, CF37 5UA :  Ring 01443 841720 to book or enquire 

LEGIONELLA RISK ASSESSMENT & WATER SYSTEMS DISINFECTION

The course is for experienced plumbing and heating operatives. It gives a comprehensive overview of the main legislative and guidance documents relative to the control of Legionnaire’s disease and the disinfection of water systems to  practical guidance on how to carry out a risk assessment of a cold and hot water system in a building and make recommendations to rectify the problems.

Please contact us via telephone or email for our next available course date.

New Entrant Training Program - Comm Heating

*

This course is now available at Tech Gas Training Ltd - Please contact us on 01202 891123 for further details

New Entrant Training Program - Comm Catering

*

This course is available at our Cardiff Centre: GATC (Wales) Ltd, Pontypridd, CF37 5UA :  Ring 01443 841720 to book or enquire